SPEARGUNS

Spearguns featuring an exclusive and modern design. The handle is made in Nylon with a double reel guide: one on the hilt and one the front side with the possibility of mounting horizontal and vertical reels.
The mechanism is entirely made in stainless steel with the line releaser that can be mounted either on the right or on the left. The safety is a push-button type. The handle butt is adjustable thanks to a system of spacers. The ergonomic handle is made in two different plastic materials and it is adjustable.

Check out the features by clicking the green hotspots on the image

The mechanism featured on Fenix spearguns is identical to the mechanism of the C4 Gladius and Mr Carbon 2.0 spearguns. It has an integrated line releaser that can be positioned on the right and/or left side. The mechanism and the trigger are entirely made in AISI316 stainless steel. The shaft release mechanism is manufactured by nailing together different layers die-cut from an AISI316 stainless steel sheet. This process makes the mechanism 100% stainless, and extremely resistant to abrasion. The trigger has a plastic perimeter cover that increases its grip. The traction of the line, on the line releaser, does not change the softness of the trigger. The triggering fluidity and softness are not affected with one or even three passes of the Nylon line or when using a bungee or a reel. The mechanism has been tested with positive results up to a load of 230Kg.

There are two models of heads featured on Fenix spearguns: one with two holes, that allows the assembly of up to two circular bands, and one with three holes that allows the use of up to three circular bands. The heads have a highly hydrodynamic design.
Feature sling guides which:

• Facilitate loading and positioning of the loaded slings along the barrel.
• Avoid overlapping of the rubber bands between them, therefore causing less friction during the shot, and help to keep the line of sight free and clean.
• Keep the slings aligned and positioned along the shaft, optimising the resistance when moving the speargun horizontally.

The line guides are made in stainless steel by diecutting.

The geometry of the guides has no sharp edges to avoid accidental cutting of the line.

The line guides are reversible for a passage of the line to the right and to the left.

The heads are made of Nylon and are coupled to the barrel with a double O-ring. They are assembled on the barrel with a stainless pin dia. 5mm.